EcoPoxy FlowCast SPR
FlowCast® SPR
The Premium Casting Epoxy for Small Projects
FlowCast® SPR
The Premium Casting Epoxy for Small Projects
FlowCast® SPR
The Premium Casting Epoxy for Small Projects
FOR ALL YOUR SMALL PROJECT NEEDS!
The Premium Casting Epoxy for Small Projects
Small Projects Casting Epoxy
FlowCast SPR has been formulated with a simple 2:1 mix ratio and is designed for small castings, allowing users to create projects with thinner profiles, such as coasters and serving trays. It can be combined with Liquid or Metallic pigments to create custom colors and effects.
FlowCast SPR is intended for pours from 6-25 mm (¼-1") per layer, with a maximum volume of 3 L. FlowCast can be worked using the same tools you have in your woodshop.
With our ever-growing line of EcoPoxy pigments and accessories, we can support you with everything you need for your epoxy projects.
Used to Create:
Serving Trays
Drink Coasters
Decorative Art Pieces
Other Small-Scale Live-Edge Casting Projects
Ecopoxy FlowCast SPR: Premium Casting Epoxy for Small Pours
Premium FlowCast SPR Features
PERFECT FOR SMALL POURS
With the ability to cast from ¼" to 1" thick per layer in pour volumes up to 3 L, FlowCast SPR is perfect for small-scale live edge wood projects.
FASTER CURING
FlowCast SPR has been formulated to cure faster making it the ideal casting epoxy for weekend projects. When used under the recommended conditions, and in accordance with Application Guide instructions, you can expect your project to be ready for finishing in a day.
BUBBLE-FREE CASTINGS
FlowCast SPR’s low viscosity provides excellent air release allowing trapped air to rise to the surface, significantly reducing bubbles in the cured casting.
OUTSTANDING TRANSPARENCY
FlowCast SPR cures to a highly desired transparent water-clear appearance. It can also be combined with Liquid and Metallic pigments to create custom colors and effects.
Specifications
*Times based on 38mm (1.5”) deep casting at a volume of 14L. Individual project times may vary depending on pour depth, volume, ambient temperature, and humidity.
Usage Instructions
Mixing Application & Instructions
Mixing
Shake Part B well before use. In a clean, dry container combine (by volume) 2 parts resin with 1 part hardener and mix thoroughly for 4-5 minutes. Add Liquid or Metallic pigments as desired and mix until evenly dispersed.
Application
Working area should be clean, dry, and free of dust. FlowCast SPR can be poured at 6-25 mm (¼-1”) per layer. FlowCast SPR will not shrink while curing under normal conditions. However, it may slowly fill cracks and voids in live edge wood pieces, causing the resin level to drop. Be prepared to add more epoxy as needed.
Epoxy releases heat when curing. For pours deeper than 25 mm (1") and/or at a volume greater than 3 L, multiple thinner pours may be necessary to prevent overheating. For best adhesion between layers, wait until the first layer is fully set to touch. Sand with 220 grit sandpaper and wipe down before pouring another layer.
Additional Tips & Tricks
Visit our Tutorials section for articles & videos on best ways to use our products.
